Click To Call(689) 488-5644Click To Get A Free Estimate
Sealed brick paver driveway at a home in Lake Mary

Paver sealing for Lake Mary homes

Paver Sealing in Lake Mary, FL

Free estimates for Lake Mary pavers, from Heathrow's gated streets to downtown, start with a call to (689) 488-5644.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 488-5644
Paver sealing

Fast, careful paver sealing in Lake Mary

Paver sealing in Lake Mary comes with a free estimate. A local contractor cleans, re-sands and seals driveways, pool decks, lanai floors and walkways. Expect a reply inside 1 business day, usually far sooner, once you call (689) 488-5644 or send a request.

Lake Mary streets are tidy, so a faded drive stands out. Green joints, tired color and a few weeds are all it takes. Sealing can reset the look in a day or two. You can book your free estimate to find out what your pavers need, and the contractor can tell you in plain terms.

Call (689) 488-5644

Family relaxing by a sealed paver pool deck near Lake Mary
Why hire local

Why hire a local paver sealing contractor in Lake Mary?

Lake Mary mixes gated communities like Heathrow with older streets near downtown, and each has its own rules about contractors and finishes. A local contractor knows to ask, so call (689) 488-5644 and name your community.

Quoted before you commit

The contractor looks at your pavers and gives a price first. The visit is free and carries no obligation.

A range to hold bids against

Companies publish $1.50 to $3.00 per square foot for the full job across Central Florida. Compare your Lake Mary bid to it.

A finish to suit the house

Matte keeps a quiet look. A wet look adds depth to darker pavers, though it shows scuffs sooner.

Fits a busy week

One Central Florida company says a job takes one to two days, so the work can be planned around your calendar.

Get Your Free Estimate in Lake Mary

Tell us about your pavers in Lake Mary.

Call (689) 488-5644

Free, no obligation

Paver joint sand detail on a walkway near Lake Mary
Common problems

What paver problems show up most in Lake Mary?

Pavers from the building boom

Lake Mary's big growth began in the late 1980s and early 1990s, and Heathrow broke ground in 1985. Pavers laid in those years are now 30 years old or more if they are original. That is long enough for several rounds of sun, rain and sprinklers. Joints thin, and the first coat of sealer is long gone or unknown. A contractor checks every edge before deciding how much sand and sealer a drive needs. Photos of any section that looks rough help the estimate, and so does a note on when the house was built.

Damp corners near the lakes

Water makes up 0.80 square miles of Lake Mary, and Big Lake Mary alone covers 99 acres. Landscape Ontario says algae grows on pavers that stay damp and shaded. A patio beside a lake or a walkway under a canopy fits that description, and so does a north-facing entry that rarely sees the sun. Expect extra washing there before any sealer goes on. A second look after the first rinse is normal, because damp corners can hide film that only shows once the surface dries.

Rust from the sprinkler source

Seminole County's reclaimed water program waters lawns with treated wastewater in areas west of I-4 and north of Lake Mary Boulevard. Elsewhere, homes may use wells, and some yards use both. University of Florida extension notes that iron-rich well water, common across the state, can leave rust on pavers. Which source feeds your sprinklers tells the contractor whether to look for orange streaks. Rust has to be treated before sealing, since a coat over it would hold the stain in place. Point out any lines near the sprinkler heads.

Pool decks and natural stone

Many Lake Mary yards have a pool and a lanai, and the deck around them takes splash, sun and bare feet. An Orlando paver company says travertine and other natural stone need a specialized impregnating sealer, and that the wrong product can cause slipperiness or peeling. A concrete paver deck is handled differently, with a water-based sealer, so the answer changes the whole plan. Tell the contractor exactly what your deck is made of, because brick pavers and travertine get different sealers. If you are not sure, a photo and the name of the installer, if you have it, will usually settle the question.

Summer storms that move the date

Orlando gets about 51 inches of rain a year, mostly June through September, with strong storms almost daily in summer. Sealer needs a dry surface. A shaded lanai floor can stay damp long after the sky clears, and pool splash adds to it. A careful contractor waits for dry stones and tells you the new day. That can mean a second visit if an afternoon storm cuts a day short, and you hear about it before it happens.

Neighborhoods

Does a gated community like Heathrow change how paver sealing is booked?

Often, yes, because gates and associations add a step before the work starts. Heathrow has a 24-hour guard gate with two entrances and about 2,200 homes in 28 named sub-communities under one master association. Each sub-community can add its own fee and rules on top of that. Check yours, then book your free estimate.

Heathrow began in 1985 when Jeno Paulucci turned celery land into a planned community, so homes there can be 30 years old or more. Heathrow Woods and Alaqua Lakes sit inside the county's reclaimed water area, which waters lawns with treated wastewater instead of drinking water. Ask the contractor how that affects your sprinkler heads. Call (689) 488-5644 with your sub-community name.

Away from the gates, Lake Mary has the streets near downtown, where Bent's Station and Belle Fontaine grew up along the railroad. The SunRail station sits about half a mile from downtown, and the Cross Seminole Trail runs past it. Tell the contractor if you live behind a gate or on an open street when you book your free estimate.

Pricing

What does paver sealing cost in Lake Mary?

Across Central Florida, companies publish $1.50 to $3.00 per square foot for a full clean, sand and seal. Lake Mary pool decks and lanai floors add area quickly, and so do wide drives. Old sealer, lost sand and stained joints move a bid within the range. To see a number for your property, book your free estimate, with no obligation.

Natural stone is priced apart from concrete pavers at some companies, so say what your pool deck is made of. Gate access and association rules can add a step, though they rarely change the rate. Photos of the deck, drive and walkways are the quickest route to a firm answer. Call (689) 488-5644 and the contractor can walk you through it.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $900
600 sq ftTwo car driveway$900 to $1,800
1,000 sq ftLarge driveway or pool deck$1,500 to $3,000
1,500 sq ftDriveway plus pool deck$2,250 to $4,500

Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Lake Mary
How it works

How does a paver sealing job work in Lake Mary?

Walk the property and check access

The contractor tours the drive, pool deck and walks, and asks about gates, codes and association rules. A short list of questions from you helps too, and so does a note about any past sealing. Lifted or sunken spots are flagged for repair, because a coat over a dip keeps the dip. Any earlier coat is identified, because a solvent-based coat means a water-based product cannot go on top. Share any past contractor names or receipts you can find, and mention any known trouble spots.

Wash, treat and protect the edges

Cleaning removes green film, stains and old dirt, and it is done in sections so each area gets checked. Screens, lanai frames, plants and the pool are covered or rinsed so wash water goes where it should. Rust marks from irrigation are treated at this point. Pool furniture and planters are moved first so the edges get washed too.

Fill the joints

Fresh sand goes in once the stones are clean, because washing pulls out joint sand. This step matters most on older Lake Mary drives, where joints have been thinning for decades. Joints are filled to the top and swept, and a second pass catches any that settle. Full joints keep soil out and help the pavers hold together. Beds and garden edges tend to need the most sand.

Allow time to dry

Sealer needs a dry surface, and that is the step the weather controls. Lake Mary's summer storms arrive almost daily, and shaded or lakeside spots stay damp longer. The contractor watches the forecast and waits rather than sealing damp stones. If a storm moves the job, you are told the new day right away. Afternoon storms are the usual cause.

Seal, then stay off

Sealer goes on in your finish, matte or wet look, applied evenly across each section. A Longwood company wants pool service paused on sealing day and the day after. It also asks for sprinklers off for 24 hours and about 24 hours before walking on the coat. Vehicles wait 48 to 72 hours, so park on the street or in the garage until the contractor says it is safe.

Services

Complete paver services in Lake Mary

A Lake Mary job moves through four stages: tour, wash, sand, seal. The tour covers access and old coats. The wash removes film and rust, and sand refills the joints before sealer goes on. Call (689) 488-5644 to ask how long each stage takes for your property and your community.

Driveways here are often wide, and pool decks and lanai floors are common. Entry courts and walkways round out most jobs. Some Central Florida companies list natural stone as its own service. Tell the contractor what you have when you book your free estimate, and list every surface you want done.

Sealer comes in water-based and solvent-based types, and an old coat decides which can be used. Then pick the look: matte for a quiet finish, wet look for depth. A wet look shows scuffs sooner. If your community reviews exterior changes, check before you choose, then call (689) 488-5644.

A job often takes one to two days, according to one Central Florida company, and summer storms can add a day. Spring and fall give calmer weather. If you work away from home, ask whether the visit can be set around your schedule when you book your free estimate.

Questions to ask before you hire

  • Will you reset any pavers that have sunk before you seal?
  • Will the sealer leave a wet look, a satin look or a matte look?
  • How do you protect my screened pool enclosure and the pool water while you work?
  • Can you send proof of insurance before anyone shows up at my house?
  • Do you strip the old sealer first, or can you seal over it?
  • How do you keep overspray off my plants, my lanai screens and my windows?
  • How long does my patio have to stay clear after the sealer goes down?
Photos

What do sealed pavers look like around Lake Mary?

Homeowners standing on a sealed paver motor court at an arched stucco entry near Lake Mary
Sealed travertine pool deck inside a screened lanai near Lake Mary
Sealed terracotta and cream paver courtyard with a wall fountain and iron chairs near Lake Mary
Sealed herringbone brick paver walkway winding through azaleas to an arched door near Lake Mary
Close view of older brick pavers after sealing near Lake Mary
Shaded paver patio with one cleaned half beside a mossy half near Lake Mary
Contractor using a surface cleaner on a brick paver driveway near Lake Mary
Two contractors sealing a paver driveway at a ranch home near Lake Mary
Contractor talking through a paver sealing estimate with a homeowner in Lake Mary
Local

Why local matters in Lake Mary

A contractor who works Lake Mary knows that access can be the hardest part. A guard gate, a master association and each sub-community's own rules all come before the first wash. A crew from farther away may skip that question. To reach a contractor already working Seminole County, call (689) 488-5644.

Local experience also covers irrigation. Seminole County's reclaimed water program serves areas west of I-4 and north of Lake Mary Boulevard, including Alaqua Lakes. Well water can carry iron that stains, so a local contractor asks which source feeds your sprinklers. You can book your free estimate and mention your setup.

Timing matters as well. Summer storms arrive almost daily, and shaded corners near the lakes stay damp longer than open drives. A contractor who knows this will not push a coat onto wet stones. book your free estimate and ask how the plan changes in the wet season.

Local roots

What should I know about Lake Mary's past before hiring locally?

Lake Mary began as a railroad stop. Two small settlements, Bent's Station and Belle Fontaine, grew along the South Florida Railroad between Sanford and Orlando. The name honors Mary Sundell, whose husband was a reverend who settled on the lake's northern shore, and the city incorporated on August 7, 1973. If you live near downtown, call (689) 488-5644 and describe your street.

Today the city blends offices along I-4 with quiet residential streets. The Lake Mary Historical Museum keeps the town's records, and the SunRail station and Cross Seminole Trail sit close to downtown. The trail runs 23 miles and links with the Seminole Wekiva Trail in Lake Mary. Near any of these Lake Mary landmarks, book your free estimate and share your street.

Questions

Frequently Asked Questions

How long does paver sealing last in Lake Mary?

Quotes run from two to five years between coats, and an Orlando-area company says most pavements need resealing about every three years. Lakeside damp, shade and daily tires push toward the short end, while open drives with little tree cover can stretch longer. Check the surface each spring, since faded patches and new stains show when a coat is thinning. A quick look at the steps and the pool edge is usually enough.

How deep is Lake Mary in Florida?

The Seminole County Water Atlas lists Big Lake Mary, a lake in the city, at 99 acres. Its mean depth is 6 feet and its maximum is 24 feet. Water like that matters to pavers because stones beside it stay damp, and damp, shaded stones grow green first. Mention any lakefront or pond view at the estimate, since it changes how much washing the job needs.

What is the average price for paver sealing in Lake Mary?

Companies publish $1.50 to $3.00 per square foot to clean, sand and seal across Central Florida. Your total depends on area, old sealer and missing sand, and large pool decks and wide drives raise it. Have each surface listed separately, and the bids line up. A written total with the square footage keeps the numbers clear for everyone, and it makes a second opinion easy to get.

Is it better to spray or roll paver sealer in Lake Mary?

A Jacksonville paver company says professionals typically do both, one right after the other. Spraying gives even coverage, and back-rolling works the sealer into the joints and prevents puddles. Ask which method is planned for your pavers. A contractor who can explain the choice usually knows the product well.

Do Heathrow's gates and rules affect scheduling a sealing job?

Most likely, so tell the contractor if your street is behind a guard gate. Heathrow has a 24-hour gate with two entrances and a master association, and each sub-community adds its own rules. Check with your association about contractor access and finishes. A short call before the estimate can save a trip, and it keeps the crew from waiting at the gate.

Can travertine or natural stone be sealed in Lake Mary?

Yes, though it is a different job from sealing concrete pavers. An Orlando company says natural stone needs a specialized impregnating sealer, and the wrong product can cause slipperiness or peeling. Tell the contractor your deck material before the estimate. A photo helps, and so does the installer's name if you have it. Brick, concrete and travertine each need a plan.

How soon can I use my pool deck after sealing in Lake Mary?

A Longwood company asks owners to pause pool service on sealing day and the day after. It plans about 24 hours before walking on the coat and 48 to 72 hours before vehicles. Your contractor will give times for your product. Mark the pool service dates on your calendar so nobody arrives mid-job, and tell the pool company the plan.

Can new sealer go over old sealer on my Lake Mary pavers?

Only when the products match. A solvent-based layer underneath rules out a water-based layer on top. The contractor checks the surface before any product is chosen, and an old receipt or can label can settle it. If neither turns up, the contractor can test a small spot before quoting. That test usually takes only a few minutes.

Ready for a Free Estimate in Lake Mary?

Call (689) 488-5644 and tell us about your pavers.

Call (689) 488-5644

Free, no obligation