Click To Call(689) 488-5644Click To Get A Free Estimate
Red clay brick paver courtyard with a wall fountain and iron bistro chairs under an oak limb

Keep brick warm in tone and tight in the joints

Brick Paver Sealing in Winter Park, FL

Call (689) 488-5644 for a free brick paver sealing estimate in Winter Park.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 488-5644
Brick sealing

Is brick paver sealing available across Winter Park?

Brick paver sealing is available at every Winter Park, FL address, with a reply in 1 business day or less, usually much sooner. The estimate is free and carries no pressure to book. For a quick question, call (689) 488-5644.

Brick is the look this town is known for, so a courtyard, walk or drive in brick pavers fits right in. It is also porous, which means it soaks up water, algae and stains faster than dense concrete. A clean, re-sand and seal helps slow all three. Central Florida companies charge about $1.50 to $3.00 per square foot. To have yours looked at, book your free estimate.

Call (689) 488-5644

Sealers

Why do brick pavers need a different sealer plan?

Porosity changes the choice

Castle Clean and Seal notes that brick, travertine, concrete and natural stone differ in porosity and sealing needs. A porous surface drinks sealer and holds moisture, so the product and the amount both matter. Ask what is planned for brick in particular when you book your free estimate.

Breathable beats sealed-in

Unilock recommends a breathable sealer that lets moisture escape, which helps prevent efflorescence. AAA Paver Sealing uses water-based urethane that it says penetrates and bonds with the surface rather than forming a coating. Both point away from a thick shell on top. For the product used on your job, call (689) 488-5644.

Clean means clean

Outdoor Escapes says a surface has to be free of dirt, debris, mold and mildew before sealant goes on. On brick, that means algae in the pores comes out first. Ask how the surface will be prepared when you book your free estimate.

Contractor holding a brick paver sample against a worn walkway under a camphor tree
Why choose us

Why does Winter Park have so much brick, and what does it mean for my pavers?

The brick streets

The city history page calls the bricked streets one of Winter Park's most prominent features, and Wikipedia describes small, winding brick streets in Olde Winter Park. Brick pavers at a home echo that. Because the neighbors' streets are brick, a worn red driveway can look tired by comparison. To bring yours back, call (689) 488-5644.

Shade that feeds algae

The same canopy of old live oak and camphor trees that shades those streets also shades many yards. Castle Clean and Seal lists mold and algae in shaded areas among local conditions. Porous brick in shade stays damp, so green growth is common on the north side of a house. Ask where the problem spots are when you book your free estimate.

Historic and HOA questions

Castle Clean and Seal's Winter Park page names College Quarter among the areas it serves. If your home is in a historic area or an association, ask the board or the city whether a sheen change needs approval. A natural or matte finish keeps the closest look to the original. Questions go to (689) 488-5644.

Service area

Which towns near Winter Park can book brick paver sealing?

Brick work is open to every place named below. A town page lists what is local to it, so start with yours. If you cannot find your street, call (689) 488-5644.

How it works

What is the brick paver sealing process?

Brick follows the same general order as other pavers, with extra attention to drying. Castle Clean and Seal describes four steps, and Paver Savers of Central Florida splits the work across two days. To plan the days at your address, call (689) 488-5644.

1. Look it over

The contractor checks joints, cracked bricks, old sealer and any efflorescence before choosing a product.

2. Treat and clean

Castle Clean and Seal starts with an algaecide, then a low-pressure wash that takes organic growth out of the pores.

3. Re-sand

SEV Central names polymeric sand for the joints, and Castle Clean and Seal works wet sand deep into them.

4. Check for moisture

Western Interlock suggests taping plastic sheeting over the surface and sealing only if no condensation forms.

5. Seal

Castle Clean and Seal applies two to three coats of water-based sealer, and Unilock uses a sprayer and a dry roller.

6. Set the rules

The contractor says how long to stay off, when to water and when to call back if a spot looks cloudy.

Finish

Should I choose a wet look or a natural finish for brick?

Deep color or quiet color

SEV Central offers two finishes: a wet look that deepens color and adds sheen, and a natural finish that stays matte. Paver Savers of Central Florida lists natural, matte and semi-gloss. Wet look makes red brick look richer, and natural keeps it close to how it looks dry. To see both, book your free estimate.

Which one lasts

Outdoor Escapes says a matte finish will last longer than a glossy one in most cases. Unilock adds that gloss can be slippery when wet, which matters on brick steps and a damp walk under oaks. Ask for a test patch on one corner of yours. Call (689) 488-5644 to arrange it.

Cloudy sealer

Why do brick pavers turn white or cloudy after sealing?

Wet joints under dry brick

Western Interlock says pavers may look dry while the joint or bedding material underneath is not, and the result is cloudy, foggy spots where the sealer did not bond. It suggests taping plastic over the area and sealing only if no condensation forms. Ask how the contractor checks, and book your free estimate.

An old coat holding water

AAA Paver Sealing says the most common cause of white pavers is moisture trapped under a previous sealer, usually a solvent type it calls not recommended for Florida. If your brick already looks hazy, the old coat may need stripping before anything new goes on. Mention the haze when you call (689) 488-5644.

Salt coming up from new brick

Unilock says sealing over efflorescence locks those salt deposits in, so the surface has to be cleaned and dry first. New pavers should wait 60 to 90 days, per Unilock and SEV Central, and AAA Paver Sealing says 30 to 60. Give the install date when you book your free estimate.

Pricing

What does brick paver sealing cost in Winter Park?

Paver Sealing Orlando FL lists a standard clean, sand and seal of brick pavers at $1.50 to $3.00 per square foot, with typical projects from $750 to $3,000. Castle Clean and Seal prices driveways at $1.50 to $2.50 and patios and walkways at $1.50 to $2.50 per square foot, with a $1,000 project minimum. The table shows four sizes. For your own number, book your free estimate.

Brick that already has a failed coat costs more. Paver Sealing Orlando FL lists stripping and resealing at $3.50 to $5.00 per square foot and says that work can take two to three days instead of one. Castle Clean and Seal says stripping usually adds $500 to $1,000 or more. If you hold a quote, call (689) 488-5644 and compare it with these ranges.

Brick areaTypical exampleClean, sand and seal ($1.50 to $3.00)Strip and reseal ($3.50 to $5.00)
250 sq ftEntry walk and front steps$375 to $750$875 to $1,250
500 sq ftCourtyard or back patio$750 to $1,500$1,750 to $2,500
800 sq ftDriveway apron and walk$1,200 to $2,400$2,800 to $4,000
1,200 sq ftWhole front yard of brick$1,800 to $3,600$4,200 to $6,000

Both ranges come from Paver Sealing Orlando FL, which lists a standard clean, sand and seal of brick pavers and a separate strip and reseal price. Castle Clean and Seal sets a $1,000 project minimum that can lift the smaller rows. Treat the figures as a guide until a contractor sees the brick.

Get a Free Estimate

How warm does it need to be to seal brick pavers?

Unilock suggests 50 to 90 degrees, with 75 as the sweet spot, plus 24 to 48 hours of clear skies before and up to 48 hours of dry weather after. Hot pavers risk staining and early peeling, it adds. Winter Park's summers are hot and humid, so cooler, drier days are the easier ones to book. To choose a day, call (689) 488-5644.

Brick in full sun can hold more heat than the air. Western Interlock warns that sealer may not work properly above 90 degrees on the surface and suggests a digital thermometer plus about two hours below 90 after the coat. Ask whether your contractor checks. You can book your free estimate to raise it.

How often should brick pavers be resealed in Winter Park?

Two to four years is the Orlando-area span, with a maintenance cleaning every 12 to 15 months according to Paver Sealing Orlando FL. SEV Central says two to three for most properties, and Unilock says three to five. Brick under open sun or a lot of foot traffic sits on the shorter side. To schedule a check, call (689) 488-5644.

If the sheen is flat and water darkens the brick before it beads, a new coat is due. If there is only a green film on the shady edge, a wash and fresh sand may be enough for now. To find out which applies, book your free estimate.

Contractor sweeping fresh sand into the joints of a brick paver walkway under oak shade
Photos

What do sealed brick pavers look like around Winter Park?

Homeowners standing on a sealed paver motor court at an arched stucco entry on a Winter Park brick paver surface
Sealed travertine pool deck inside a screened lanai on a Winter Park brick paver surface
Sealed terracotta and cream paver courtyard with a wall fountain and iron chairs on a Winter Park brick paver surface
Sealed herringbone brick paver walkway winding through azaleas to an arched door on a Winter Park brick paver surface
Close view of older brick pavers after sealing on a Winter Park brick paver surface
Shaded paver patio with one cleaned half beside a mossy half on a Winter Park brick paver surface
Contractor using a surface cleaner on a brick paver driveway on a Winter Park brick paver surface
Two contractors sealing a paver driveway at a ranch home on a Winter Park brick paver surface
Questions

Frequently Asked Questions

How long does paver sealing last in Florida?

Orlando-area guides say two to four years, and a SEV Central page says two to three for most properties. Unilock says three to five. Brick in full sun or under heavy traffic sits at the short end, and a shaded walkway can go longer between coats.

What is the average price for paver sealing?

Paver Sealing Orlando FL lists a standard clean, sand and seal of brick pavers at $1.50 to $3.00 per square foot, with typical projects between $750 and $3,000. Stripping and resealing runs $3.50 to $5.00. Castle Clean and Seal sets a $1,000 project minimum on small jobs.

Is there a downside to sealing pavers?

Yes. It has to be repeated, and the wrong product or too much of it can leave a cloudy film. Unilock names trapped moisture, over-application and sealing over an incompatible earlier product as causes. Brick is porous, so the drying check before sealing matters more than usual.

How warm does it need to be to seal pavers?

Unilock suggests 50 to 90 degrees, with 75 as the sweet spot, and clear skies for 24 to 48 hours before. Western Interlock warns that sealer may not work properly above 90 degrees on the paver surface, and a brick patio in the sun can run hotter than the air.

How much does it cost to have pavers cleaned and sealed?

Posted rates in the Orlando area come to $1.50 to $3.00 per square foot for the whole job. A 500 square foot brick area comes to about $750 to $1,500 at that rate. Castle Clean and Seal notes that stripping failed sealer usually adds $500 to $1,000 or more.

How often should you seal pavers in Florida?

Expect every two to four years, with a maintenance cleaning every 12 to 15 months in between according to Paver Sealing Orlando FL. Unilock says many owners wait three to five years. Water that soaks in instead of beading is the clearest sign a coat has worn.

What do professionals use to seal pavers?

Water-based sealer is the standard in Florida, according to Castle Clean and Seal, because moisture can escape. AAA Paver Sealing uses water-based urethane in one and two part versions, and Unilock applies sealer with a sprayer and a dry roller. Ask which product your contractor plans to use and why.

Can I seal new brick pavers right away?

Wait first. Unilock and SEV Central both say 60 to 90 days so the white haze called efflorescence can clear, while AAA Paver Sealing gives 30 to 60. Sealing over it locks the salts in, according to Unilock. Give the contractor your install date.

Why do my sealed brick pavers look cloudy?

Moisture under the coat is the usual cause. Western Interlock says joint or bedding material can stay wet when the pavers look dry, and AAA Paver Sealing says an old solvent sealer holding moisture is the most common reason pavers turn white. A contractor can test a small patch before deciding how to fix it.

Book a brick paver sealing estimate in Winter Park

Describe the brick and the spot that bothers you most, and a contractor answers within 1 business day, usually much sooner.

Call (689) 488-5644

Free, no obligation