Click To Call(689) 488-5644Click To Get A Free Estimate
Brick paver motor court in front of a stucco home shaded by live oaks

Richer color and joints that hold

Paver Sealing in Winter Park, FL

Call (689) 488-5644 for a free paver sealing estimate on your Winter Park driveway, patio or pool deck.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 488-5644

Can I get paver sealing in Winter Park this month?

A local contractor seals pavers throughout Winter Park, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking is your call. To begin, call (689) 488-5644.

Sealing deepens paver color, keeps sand in the joints and makes pollen, leaves and dirt easier to rinse off. Picture the driveway after a humid summer under the oaks, dull at the edges and thin at the seams, turned dark and even again with every joint packed. Driveways carry tires and oil while pool decks carry splash and bare feet, so each area gets its own plan. Tell the contractor how each area is used when you book your free estimate.

Call (689) 488-5644

One contractor with a pump sprayer and another with a roller working on a brick paver driveway

What does a paver sealing job include in Winter Park?

Plan on four parts: a walk-through, a wash, fresh joint sand and the coat. The wash and the drying wait take the longest. For a walk through each part at your address, call (689) 488-5644.

Walk-through

Square footage, sunken spots, broken pavers, old sealer and standing water are noted before a price is set.

Wash

An algaecide goes on, then a low pressure wash lifts algae, dirt and leaf stains without blasting out the joints.

Joint sand

Fresh sand fills every gap so the pavers lock together and weeds have less room.

Sealer coat

The coat goes on a fully dry surface at the rate on the product label, with a dry roller taking up any excess.

How can I tell my pavers are ready for a new coat?

Look for faded color, joints that sit below the paver edges, sand spread across the drive after a storm and water that soaks in instead of beading. An Orlando paver company lists stains, fading, weeds and shifting pavers as the cost of waiting. Topping off sand early is cheaper than relaying pavers that moved. For a quick opinion, call (689) 488-5644.

Which sealer holds up in Central Florida humidity?

No single product fits every home, so ask the contractor which one they plan to use and why. Castle Clean and Seal calls water-based sealer the professional standard in Florida because moisture can escape, and says solvent-based products can turn white and peel in humid weather. Unilock, a paver maker, prefers water-based when possible and calls solvent-based slightly more durable but fussy about dryness. To compare options for your pavers, call (689) 488-5644.

Coverage gives you a way to check a quote. Unilock lists about 100 to 150 square feet per gallon for water-based sealer and 80 to 120 for solvent-based, so a 600 square foot driveway needs several gallons per coat. Ask what the contractor plans to use on each area when you book your free estimate.

Wet look or matte: which fits a Winter Park home?

A wet look gives the deepest color and the most shine, while matte keeps pavers near their new appearance. Around a pool, footing matters more than shine, so a lower sheen is often the safer choice. If your home is in an association or a historic district, ask whether a high gloss needs approval first. To see samples of both, book your free estimate.

How often should pavers be resealed in Winter Park?

Plan on every two to four years, the span two Orlando paver companies publish, with a maintenance cleaning every 12 to 15 months in between according to one of them. Unilock says three to five years, and a driveway in full sun may land near two. A shaded patio can stretch longer. Once water sinks in rather than beading up, the old coat has worn out. To have yours checked, call (689) 488-5644.

Does a second coat of sealer protect pavers longer?

No. Unilock warns that sealing in stages and layering over the same spot causes uneven gloss, and Orlando Paver Sealing Company says poor prep or an inferior product causes whitening and peeling. One even coat at the label rate on a clean, dry surface does the job. A quote that pitches three or four coats as added protection deserves a question when you book your free estimate.

When is the right time of year to seal pavers in Winter Park?

The forecast matters more than the calendar, but the season helps. The National Weather Service puts the typical start of Orlando's dry season near October 15 and the median rainy season start near May 27, with afternoon storms building through summer. That makes fall and winter the stretch with fewer storms to wait out. New pavers also need 60 to 90 days first, since Unilock says efflorescence typically takes two to three months to clear. If your pavers are new, give the contractor the install date when you call (689) 488-5644.

Unilock also asks for 24 to 48 hours of clear skies before sealing and temperatures between 50 and 90 degrees, with 75 ideal. Hot pavers risk stains and early peeling. Orange County limits watering to one day a week while Eastern Standard Time is in effect, and the sprinklers have to stay off while the coat cures, so plan around your assigned day. To pick a date, book your free estimate.

Can sealing fix pavers that have sunk?

No. A paver that has dropped stays low under a coat of sealer, and a gap stays a gap. Pavers that rock under a car or sit in a puddle after rain need their base repaired first, and sand only holds once they are level. Ask whether the quote includes leveling or lists it separately, and raise it when you book your free estimate.

Surfaces

Which areas of a Winter Park home can be sealed?

Driveways, pool decks, courtyards and front walks can all take a coat. They age in different ways, so the plan shifts with each surface. For the spot that worries you most, book your free estimate.

Driveways

Tires and oil drips hit the driveway first, and the open stretch gets the most sun. Sealing here keeps color even and the joints full under the wheels.

Pool decks and lanais

Chlorinated water, constant moisture and sun are hard on a pool deck, according to Castle Clean and Seal. Sealing around the water should still leave bare feet on a surface with grip.

Patios and courtyards

A courtyard under oak branches stays damp long after the rest of the yard dries. Sealing there is mostly about getting the green out of the corners.

Walkways and entries

The front walk is narrow and sits beside beds, mulch and sprinklers. Sealing at the entry is a small job that every guest sees.

Common problems

What wears on pavers around Winter Park?

Five things come up again and again: oak shade, storm sand loss, leaf litter, pool wear and sun fading. Each is cheaper to handle early. To learn which of these apply to yours, call (689) 488-5644.

1. Green growth in oak shade

The city is known for its tree canopy, and Olde Winter Park's winding brick streets sit under live oak and camphor trees. Shade keeps pavers damp, and damp pavers grow algae.

2. Sand lost in summer storms

Afternoon cloud buildups are routine in a Central Florida summer, the National Weather Service says. Heavy rain carries sand out of the joints, and low joints let pavers shift and weeds in.

3. Leaves and litter from the trees

The city counts about 22,000 street and park oaks. Leaves left on a patio hold moisture against the surface and mark it.

4. Wear around pools

Castle Clean and Seal calls chlorinated water, constant moisture and sun a harsh mix for pool decks. Color fades and edges get slick where splash water lands.

5. Fading on open driveways

An open driveway sits in direct sun from sunrise to sunset. One Orlando paver company says full sun can mean a new coat about every two years.

Pricing

What does paver sealing cost in Winter Park?

Expect $1.50 to $3.00 per square foot to clean, sand and seal, the range Orlando-area company pages publish. Castle Clean and Seal puts driveways at $1.50 to $2.50 and pool decks at $1.75 to $3.00, and sets a $1,000 project minimum. Size moves the rate, and so does condition. Weeds, algae and efflorescence add prep, and stripping failed sealer usually adds $500 to $1,000 or more. For a number written for your home, book your free estimate.

Natural stone costs more. Paver Sealing Orlando lists travertine at $2.00 to $3.50 per square foot and strip and reseal at $3.50 to $5.00. If a quote looks far below these ranges, ask which steps it leaves out. Holding a quote already? Call (689) 488-5644 and compare it with these figures.

A wash alone may do it, so read about paver cleaning and joint sand or browse the towns on the list, or return to Winter Park paver sealing.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $900
600 sq ftTwo car driveway$900 to $1,800
1,000 sq ftLarge driveway or pool deck$1,500 to $3,000
1,500 sq ftDriveway plus pool deck$2,250 to $4,500

Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Terracotta paver pool deck beside a lake with oak trees and a stucco home behind it
Why choose us

Why hire a local contractor for paver sealing?

A contractor who works around Winter Park already plans for oak shade, lake humidity and storm season. You get the price in writing and make the call yourself. To begin, call (689) 488-5644.

Contractors who know the area

A company that works in and around Winter Park already deals with oak shade, lake humidity and summer storms. That makes the first visit more useful.

Free to ask

The visit and the estimate cost nothing. If the number does not suit you, you can say no and owe nothing.

Prices you can check

Central Florida companies publish what they charge per square foot, and this site shows that range. A bid far above or below it deserves a question.

You set the pace

Ask for the price on paper, then take as long as you like to decide. Before signing, read the contractor standards page for the points worth confirming.

Ready for a free paver sealing estimate in Winter Park?

A phone call or the short form brings an answer inside 1 business day, usually much sooner.

Call (689) 488-5644

Free, no obligation

Gloved hand scrubbing a brick paver with a stiff brush next to a section covered in moss
Photos

How do Winter Park pavers look after a fresh seal?

Homeowners standing on a sealed paver motor court at an arched stucco entry at a Winter Park home
Sealed travertine pool deck inside a screened lanai at a Winter Park home
Sealed terracotta and cream paver courtyard with a wall fountain and iron chairs at a Winter Park home
Sealed herringbone brick paver walkway winding through azaleas to an arched door at a Winter Park home
Close view of older brick pavers after sealing at a Winter Park home
Shaded paver patio with one cleaned half beside a mossy half at a Winter Park home
Contractor using a surface cleaner on a brick paver driveway at a Winter Park home
Two contractors sealing a paver driveway at a ranch home at a Winter Park home
How it works

How does the paver sealing process work from start to finish?

Most jobs follow the same five steps, from the first measurement to the final walk-through. If you are ready to schedule, call (689) 488-5644.

1. Measure and inspect

Before quoting the sealing job, the contractor measures the paved area and writes down sunken pavers, broken edges, old sealer and any pooling water.

2. Protect and wash

Plants, screens and doors get covered and the sprinklers go off. An algaecide goes on, then a low pressure wash cleans the surface without emptying the joints.

3. Refill the joints

After the pavers dry, fresh sand is swept in and settled, and the extra is cleared off the top.

4. Let it dry, then seal

Sealer goes on a fully dry surface. A pump sprayer lays it down and a dry roller takes up the excess, the method Unilock describes.

5. Walk the job

The contractor walks the area with you and says how long to keep feet, furniture and cars off. You also hear when to expect the next coat.

Questions

Frequently Asked Questions

Is it better to spray or roll paver sealer?

Many contractors do both. Unilock, a paver maker, lists a garden sprayer with an adjustable nozzle, a foam roller or a short pile roller, and says a dry roller after spraying takes up excess and cuts drip marks. How even the coat ends up matters more than the tool.

How much is paver sealing in Florida?

Published Orlando-area rates for a full clean, sand and seal run $1.50 to $3.00 per square foot. Castle Clean and Seal puts driveways at $1.50 to $2.50 and pool decks at $1.75 to $3.00, and a 600 square foot Winter Park driveway comes to about $900 to $1,800. Stripping failed sealer and repairs cost extra.

Why is paver sealing so expensive?

Most of the price pays for prep. A full job means an algaecide, a wash, fresh joint sand, drying time and then the coat, and Castle Clean and Seal adds that stripping failed sealer usually costs another $500 to $1,000 or more. A Paver Sealing Orlando price page lists strip and reseal at $3.50 to $5.00 per square foot.

Is it necessary to seal pavers in Florida?

It is not required, but it slows fading, stains, weeds and sand loss. An Orlando paver company lists those as the risks of leaving pavers bare. The cost is a repeat coat every two to four years.

How often do you seal pavers in Florida?

Orlando paver companies publish two to four years, and one adds that a maintenance cleaning every 12 to 15 months extends the coat. Unilock says three to five. Full-sun driveways sit at the short end.

How long should you stay off pavers after sealing?

Castle Clean and Seal says to keep foot traffic off for at least 4 to 6 hours, furniture for about 24 hours and cars for at least 48 hours. Humid or shaded areas take longer. The product label gives the exact times.

Does rain right after sealing ruin the coat?

Rain on a fresh coat can leave white marks or cloudiness. Unilock asks for up to 48 hours of dry weather while sealer cures, so expect a summer storm to move the date.

Can the pavers around my Winter Park pool be sealed?

Yes. Castle Clean and Seal calls chlorinated water, constant moisture and sun a harsh mix for pool decks and suggests a non-slip additive for travertine. Ask a contractor about traction before choosing a finish.

How long does sealing take at a Winter Park home?

A standard job usually takes one day, according to Paver Sealing Orlando, and stripping old sealer stretches it to two or three. A water-based coat is walkable in about 3 to 4 hours and cured in 24 to 48.

Ask what your Winter Park pavers need next

Give your street and the spot that worries you, and a contractor writes back within 1 business day, usually much sooner.

Call (689) 488-5644

Free, no obligation